UHU Plus Endfest 300 Superglue

Do you need the right glue to glue your power magnets?

UHU glue for metal, glass, porcelain, ceramics, hard PVC, wood, cardboard, stone and concrete. 2-component glue with fantastic adhesion.

The set contains: 1 pc. superglue, 1 pc. hardener and 1 set with tray and stirring stick to mix the glue in. Brand: UHU Plus Endfest 300.

Mixing ratio: 1:1.

Adhesion of the glue:
Up to 3000 N per cm2 v/180 degrees (equivalent to a bearing capacity of approx. 300 kg. per cm2) - the more heat, the stronger the result. Example at a room temperature of 20 degrees (12 hours drying) = 1200 N per cm2.

How to glue magnets:

• The surface must be dry and clean.
• Smooth surfaces must be lightly sanded with fine-grained sandpaper before gluing (this also applies to the side of the magnet to be glued).
• Mix binder and hardener (1:1 - 1 part glue to 1 part hardener).
• li>
• Apply the glue to one part only - either to the magnet or to the "material".
• Exception: if you are working with rough surfaces, glue must be applied to both parts.
• Place the parts against each other without pressing.
• Let dry for 12 hours at room temperature.